Products
-
IP55/54 55KW 75HP Factory Price Two Stage Industrial Screw Type Air Compressor Machine
IP55/54 55KW 75HP Factory Price Two Stage Industrial Screw Type Air Compressor Machine
SHORT DESCRIPTION:
1. No gears, no traditional faults such as couplings, no bearings for the motor, more stable operation and less noise;
2. Unique design, dual hosts, dual motors, horizontal placement, less vibration, more stable and comfortable operation;
3. Dual air ends, double frequency conversion, stepless speed change, so that the host is always running at an energy-saving speed, more energy-saving;
Oil-cooled IP55 fully enclosed motor, the motor is controlled in a good state, with higher efficiency and safety.
Technical information
Model:ETSV-55A Power(KW) 55KW Horse(HP) 75 HP Pressure Bar M³/min 7/8/10/13 12.8/12.4/9.7/8.76.2 Exhaust temperature ≤ +8ºC Intake air temperature No more than 45 degree centigrade Noise dB(A) ≤68±2 Oil content (ppm) ≈3 Power V/pb/Hz 380/3/50 or as your request L×W×H mm 2100*1260*1600 Weight (kg) 1700KGS Diameter of outlet 2” Applicable Industries General Industry Place of Origin Shanghai, China Warranty 13 months from the delivery date Working Pressure 7 bar, 8 bar, 10 bar,13 bar Machinery Test Report Video outgoing-inspection Gas Type Air Condition New Type Screw Power Source AC POWER Lubrication Style Lubricated Brand Name OSG Voltage 220V / 230V / 380V / 400V / 440V / 460V / 600V or others After-sales Service Provided Engineers available to service machinery overseas Cooling Method Air Cooling / Water Cooling Drive Method Direct Driven / Coupling Color Red and grey / Customize OEM / ODM Offered / Suppied Insulation Grade F Protection Grade IP54 /IP55 Exhaust Oil Content < 3ppm -
AC Power 0.3mpa to 0.5mpa 3bar -5bar Low Pressure Screw Air Compressor for Industrial Electrical
AC Power 0.3mpa to 0.5mpa 3bar -5bar Low Pressure Screw Air Compressor for Industrial Electrical
Working Pressure: 3 – 5bar
Air Delivery: 7.0 – 60m3/min
Motor Power: 30 kw to 250kw
Type of Driving: Direct Driven
Type of Cooling: Air Cooling/Water Cooling -
20bar pressure Screw Air Compressor for laser cutting machine
Belt trasmission,easy to adjust and replace.
To avoid the orrurrence of air end damage due to any other fault conditions,protect the normal service life of the compressor
Every running state of belt tension reaches to the optimum value.
Greatly extend the working life of the belt and reduce the motor and rotor bearing load by avoiding strarup overlarge tension.
Easy and fast to replace the belt.
20bar high pressure special for laser cutting
High efficiency
-
Double permanent magnet motor integrated two-stage compression series
1.Compact size
2. Separate air intake to reduce the load on the cooler
3. Independent installation panel, dual frequency conversion PLC controller
4.Unique air inlet mesh cover, removable and clean dust cover
5.Exhaust fixed pipe clamp to prevent gas shock
-
All In One Slient Explosion Proof Industrial Air Compressor Energy Saving Screw Air Compressor 4 in1
Integrated Innovative Design
Innovative component integration results in a compact, quiet air system engineered for efficiency & performance, providing high-capacity air delivery and stable system pressure with minimal installation space.Best-in-class Maintenance and Operating Cost
Due to our efficient air filtration system in the air compressor, cleaner suction air keeps the internal components of the compressor clean which helps in maintaining optimum cooling efficiency and low oil fill hence increasing longer life of consumablesEfficient Air-oil Separation
The air-oil separation of our air compressor is derived by impact and deceleration which involves 3 stages. Stage 1: Impact of the air-oil mixture on the tank circumferential area. Stage 2: Deceleration action of the air-oil mixture to remove the oil particles. Stage 3: Air with minor traces of oil enters the spin-on separator for purification -
electrical motor PM AC ASD rotary air vaccum pump compressor screw compressor
1.energy-saving screw vacuum pump adopts the new-generation screw profile .
2.directly driven , no transmission loss to get nearly 100% transmission efficiency.
3.Vector frequency conversion control, quick response, reasonable distribution of current value, and better torque boost effect.4.Full range of permanent magnet frequency conversion technology
-
15.5bar special pressure screw air compressor for laser cutting machine
Skid-mounted laser cutting air compressor, integrated innovative design, ready to use, integrated air compressor, cold dryer, filter air storage tank, suction dryer, built-in drainage filter, to ensure high quality compressed air , wider application range, stable air supply pressure, saving installation space, ready-to-buy and install. Adopt Baldor cloud intelligent operating system, with user-friendly functions such as use reminder, overpressure and high temperature alarm, compressed air quality warning, etc.
-
Micro Heat Regeneration Desiccant Compressed Air Dryer For Compressed Air
Flowing range: 1.5-500 m3/min
Pressure range: 0.6-1.0 MPa
Intake temp:45it
Regeneration gas volume:6%
Working cycle: 90-480 minutes
Pressure dew point: -20 IT, -40 VII, -70 IT Intake oil content::;;;0.1 PPM
Adsorbent: alumina + molecular sieve
Power supply: 380V /3Ph/50HZ
*High pressure and stainless steel can be customized.
*Customization is welcome for above 1.0MPa.
-
0.6,m³-60m³ heatless regenerative adsorption for drying compressed air
1.5-500 m3/min heatless regenerative adsorption for drying compressed air
The heatless regenerative adsorption compressed air dryer is specially designed for high-quality dry compressed air customers. It is suitable for various types of air compressors from 0.6 cubic to 60 cubic meters and can be used in all production systems.
Design conditions
Flow range: 1.5-500 m3/min
Pressure range: 0.6-1.0 MPa
Intake temp:,s:;45it
Regenerated gas volume: spoon 5%
Working cycle: 4-20 minutes
Pressure dew point: -20 seven, -40 it
Intake oil content:,s:;0.1 PPM Adsorbent: alumina + molecular sieve
Power supply: 220V /1Ph/50HZ
*High pressure and stainless steel can be customized.
*Customization is welcome for above 1.0MPa. -
10A-PM permanent magnet frequency screw air compressor 220v 50hz single phase
Product classification: permanent magnet frequency screw air compressor
Product Model: XDV-8A
Product power: 1.0m³/min(0.8Mpa)/1.1m³/min(0.7Mpa) -
Single Stage Permanent Magnet Oil Cooling Permanent Magnet Variable Frequency Scroll Compressor
1..IE ultra-efficient oil-cooled permanent magnet motor with better energy efficiency performance
2.Unique quiet room design; quieter to operation Glass view window of the whole machine, dynamic monitoring of running status
3.0SG optimized system design makes the whole machine more convenient to install, maintain and maintain
4.Super efficient, super quiet, super convenient to make customers more satisfied
-
Industrial Oil Free Vsd Screw Air Blower /Vacuum Pump With Inverter and Pm Motor
High quality PM&VSD OIL-FREE SCREW BLOWER
1. Adopt the world’s leading high-efficiency molding line to create a stable and high-efficiency host
2. Advanced coating technology makes the rotor gap smaller, improves volumetric efficiency,
It also effectively protects the rotor and has a longer life
3. Adopt world famous brand FAG bearings to ensure its reliability
4. Adopt international level 5 precision synchronous gear and driving wheel to ensure reliability and prolong service life
5. The labyrinth seal and screw seal assembly ensure that the air is free of oil, reaching the class zero level
6. The unique lubricating and oil draining channel ensures good lubrication and cooling of bearings and gears, while improving the efficiency of the main engine